DA/DAH/SL2 Series
Overview
- Type: Crank presses
- Press capacity: 300-1,200 ton
- Part size: medium to large
- Slide kinematics: Sinusoidal (DA, DAH) or link(SL)
- Application: as a single press in progressive operation or as part of a press line and as a transfer press
Description
Stamping presses of the DA series are suitable for a wide range of medium sized parts and for blanking as well as drawing With single reduction gear and smaller stroke length, DAH-type presses have the advantage of higher SPM compared to DA-type press. SL2 press guarantees the high productivity and good quality as it is a link motion press which ensures a low down-coming speed and high return speed.
Features and Benefits
- Mid-Size Press model with Powerful force and high accuracy that is suitable for a wide range of jobs from thin plate drawing to thick plate blanking High part quality due to rigid, FEM-optimized press design.
- Strongly resistant to eccentric loads due to the widely installed SUSPENSION POINT (2-POINTS) and installation of long 6-faced guide The automatic centralized lubrication system increases productivity and availability.
- Detachable FRAME fastened by TIE ROD (Application of Hydraulic TIE ROD NUT)
- Low noise level through operating the deceleration gear with high precision in an oil tank room.
Technical Specifications
DA Series
| Model | DA-300 | DA-400 | DA-500 | DA-600 | DA-800 | DA-1000 | DA-1200 | |
|---|---|---|---|---|---|---|---|---|
|
Press Capacity |
ton |
300
|
400 |
500 |
600
|
800
|
1000
|
1200
|
|
Rated Tonnage Point |
mm |
10.0
|
10.0
|
10.0
|
10.0
|
10.0
|
10.0
|
10.0
|
|
Stroke Rate
|
spm |
12-24
|
12-24
|
12-24
|
12-24
|
12-24
|
12-24
|
12-24
|
|
Stroke Length
|
mm |
300
|
400
|
450 |
450 |
450 |
450 |
450 |
|
Slide Adjustment |
mm |
200 |
200 |
250 |
250 |
250 |
250 |
250 |
|
Die Height |
mm |
650
|
750
|
800
|
850 |
850 |
850 |
850 |
|
Slide Dimension |
mm |
2500x1600 |
2500x1600 |
2500x1600 |
3000x1700 |
3000x1700 |
3500x1700 |
3500x1700 |
|
Bolster Dimension
|
mm |
2500x1600 |
2500x1600 |
2500x1600 |
3000x1700 |
3000x1700 |
3500x1700 |
3500x1700 |
* SDAU = Slide stroke down, adjustment up | ST = Standard, HS = High-Speed, LS = Long Stroke | Subject to technical modifications.
DAH Series
| Model | DAH-300 | DAH-400 | DAH-500 | DAH-600 | DAH-800 | DAH-1000 | |
|---|---|---|---|---|---|---|---|
|
Press Capacity |
ton |
300
|
400 |
500
|
600
|
800
|
1000
|
|
Rated Tonnage Point |
mm |
7.0 |
7.0 |
7.0 |
7.0 |
7.0 |
7.0 |
|
Stroke Rate
|
spm |
30-60
|
30-60
|
30-60
|
30-60
|
30-60
|
25-50
|
|
Stroke Length
|
mm |
200
|
200
|
200
|
250
|
250
|
250
|
|
Slide Adjustment |
mm |
200
|
200
|
200
|
250
|
250
|
250
|
|
Die Height |
mm |
600
|
650 |
750 |
800 |
800 |
800 |
|
Slide Dimension |
mm |
2500x1600
|
2500x1600
|
2500x1600
|
3000x1700 |
3000x1700 |
3500x1700 |
|
Bolster Dimension
|
mm |
2500x1600
|
2500x1600
|
2500x1600
|
3000x1700 |
3000x1700 |
3500x1700 |
* SDAU = Slide stroke down, adjustment up | ST = Standard, HS = High-Speed, LS = Long Stroke | Subject to technical modifications.
SL2 Series
| Model | SL2-300 ST / HS | SL2-400 ST / HS | SL2-500 ST / HS | SL2-600 ST / HS | SL2-800 ST / HS | SL2-1000 ST / HS | |
|---|---|---|---|---|---|---|---|
|
Press Capacity |
ton |
300
|
400 |
500
|
600
|
800
|
1000
|
|
Rated Tonnage Point |
mm |
10 7 |
10 7 |
10 7 |
10 7 |
10 7 |
10 7 |
|
Stroke Rate
|
spm |
12-24 30-60 |
12-24 30-60 |
12-24 30-60 |
12-24 25-50 |
12-24 25-50 |
12-24 25-50 |
|
Stroke Length
|
mm |
300 200 |
400 200 |
450 200 |
450 250 |
450 250 |
450 250 |
|
Slide Adjustment |
mm |
200
|
200
|
250
|
250
|
250
|
250
|
|
Die Height |
mm |
650 600 |
750 650 |
800 750 |
850 800 |
850 800 |
850 800 |
|
Slide Dimension |
mm |
2500x1600
|
2500x1600
|
2500x1600
|
3000x1700 |
3000x1700 |
3500x1700 |
|
Bolster Dimension
|
mm |
2500x1600
|
2500x1600
|
2500x1600
|
3000x1700 |
3000x1700 |
3500x1700 |
* SDAU = Slide stroke down, adjustment up | ST = Standard, HS = High-Speed, LS = Long Stroke | Subject to technical modifications.