DL/DTL Series

Overview

Type: forming, link presses
Press Capacity: 600-3,375 tons
Part Size: medium to large
Slide Kinematics: link
Application: stamping, drawing & forming

Description

The modified slide kinematics of the DL and DTL Series is ideal for parts requiring a higher drawing depth. The Series can be installed as a single press in progressive or transfer mode or as a fully automated press line.

Features & Benefits

Proven and continuously optimized technology for reliable production processes.
The link drive of the DL and DTL Series reduces the slide velocity during the forming phase, providing the perfect solution for parts with higher drawing depths.
The solid, low-stress annealed press bodies are FEM-calculated and optimized by “hot-spot analysis” areas subject to higher loads.
Presses in tie rod design are connected to a rigid frame via hydraulically pre-stressed tie rods.
The outside located pressure points, as well as an 8-fold slide guiding system, absorb off-center loads, spare press, and dies to ensure consistent part quality.
The automatic centralized lubrication system increases productivity and availability.
Availability of an extensive range of optional equipment (i.e., die cushions, pneumatic ejectors, or moving bolsters for a faster die change).

Technical Specifications

Metric

DL2P Series

Model		DL2P-600	DL2P-800	DL2P-1000	DL2P-1200	DL2P-1400
Press Capacity	ton	600	800	1000	1200	1400
Rated Tonnage Point	mm	13	13	13	13	13
Stroke Rate	spm	50	40	35	30	27
Stroke Length	mm	700	700	700	700	700
Slide Adjustment	mm	600	600	600	600	600
Die Height	mm	1200	1200	1200	1200	1200
Slide Dimension	mm	2800x1600	2800x1600	3000x1800	3000x1800	3000x1800
Bolster Dimension	mm	2800x1600	2800x1600	3000x1800	3000x1800	3000x1800

* SDAU = slide stroke down, adjustment up | 2P = 2-point design | 4P = 4-point design | Subject to technical modifications

DL4P Series

Model		DL4P-600	DL4P-800	DL4P-1000	DL4P-1200	DL4P-1500	DL4P-2000	DL4P-2500
Press Capacity	ton	600	800	1000	1200	1500	2000	2500
Rated Tonnage Point	mm	13	13	13	13	13	13	13
Stroke Rate	spm	50	40	35	30	27	27	27
Stroke Length	mm	800	800	800	800	800	800	800
Slide Adjustment	mm	600	600	600	600	600	600	600
Die Height	mm	1300	1300	1300	1300	1300	1300	1400
Slide Dimension	mm	3200x2100	3200x2100	3400x2300	3400x2300	4500x2500	4500x2500	4500x2800
Bolster Dimension	mm	3200x2100	3200x2100	3400x2300	3400x2300	4500x2500	4500x2500	4500x2800

* SDAU = slide stroke down, adjustment up | 2P = 2-point design | 4P = 4-point design | Subject to technical modifications

DTL Series

Model		DTL2-1000	DTL2-1200	DTL2-1500	DTL2-2000	DTL4-1500	DTL4-2000	DTL4-2500	DTL4-2600
Press Capacity	ton	1000	1200	1500	2000	1500	2000	2500	2600
Rated Tonnage Point	mm	13	13	13	13	13	13	13	13
Stroke Rate	spm	35	30	27	27	27	27	27	27
Stroke Length	mm	600	600	600	650	700	700	800	800
Slide Adjustment	mm	600	600	600	600	600	600	600	600
Die Height	mm	1200	1200	1200	1200	1200	1200	1200	1200
Slide Dimension	mm	4000x1700	4000x1700	4500x1700	4500x2400	5500x2500	6300x2400	6300x2400	6300x2400
Bolster Dimension	mm	4000x1700	4000x1700	4500x1700	4500x2400	5500x2500	6300x2400	6300x2400	6300x2400

* SDAU = slide stroke down, adjustment up | ST = standard | HS = high-speed | LS = long stroke | Subject to technical modifications